Interlogix Simon XT Installation Manual page 69

Hide thumbs Also See for Simon XT:

Table of Contents

•

Keyfob: Press the Light button repeatedly to turn all lights on and off. The

panel responds with Lights on/off.

•

Remote handheld touchpad: Press the Lights on button and the unit

number of the lamp module using the numeric buttons to test individual lamp

modules 1 through 8. The panel responds with Light # on/off. Pressing the

Lights on or Lights off button twice turns all the lights on or off.

X10 siren and lamp module functions

All sirens turn off when the system is disarmed or when the siren timeout expires.

Siren priority is fire (highest priority), intrusion, and emergency. Table 33

identifies the light information for each of these siren types.

Table 33: Alarm siren and X10 light information

X10 lights

X10 siren

Interior and panel siren Temporal 3

If an alarm of greater priority occurs during an alarm of lower priority, the greater

priority alarm sirens sound. Fire alarms sound a temporal 3 pattern (0.5 seconds

on, 0.5 seconds off for three beeps then 1.5 seconds off).

Note: The X10 siren must be set to unit #9 to "hear" emergency alarms and

status beeps. To hear emergency alarms only, set to unit #10.

Simon XT Installation Manual

Fire

Steady

Intrusion

Flashing

Steady

below

Emergency

Steady

Alarm beeps

Fast on/off

Table of Contents