Audio Verification Options - Interlogix Simon XT Installation Manual

Activity
Arm doors/windows and motion
sensors
Disarm
Chime
Special chime
Trouble beeps
No activity

Audio verification options

Table 23 below describes the Audio Verification Options menu.
Table 23: Audio Verification Options menu
Function Default
Audio mode Off
Fire shutdown Off
Panic talk Off
VOX RX gain 06
50
Piezo beep response
Exit delay. Four beeps sound every 5 seconds and four times
per second during the last 10 seconds.
Silent exit. Four beeps sound at the beginning of the exit
delay and four more sound just before the exit delay expires.
Entry delay. Four beeps sound every 5 seconds and four
times per second during the last 10 seconds.
One beep.
Two beeps (when programmed).
Three beeps (when programmed).
Six beeps every minute. Press Status to stop beeps for 4
hours.
Twenty beeps every minute for 5 minutes (when
programmed).
Description
Determines the audio mode.
1 (Instant) = Panel stays online with central station for an instant
audio session.
2 (Callback) = Panel hangs up and waits for a callback from the
central station operator before starting an audio session.
Off = No audio verification.
Determines whether system fire sirens are silenced during a
two-way audio session (on), or not (off). Beeps sound every 10
seconds while sirens are silenced.
Determines whether the central station operator can talk to the
user during a silent alarm (off), or just listen in on the premises
(on). Silent alarms occur when sensors learned into groups 02
or 03 are tripped, when the duress code is entered, or when the
panel Police button is pressed and the silent panel police panic
option is turned on.
Determines the receiver gain level during two-way audio
sessions. If the VOX is switching the speaker on when the
central station operator is not talking, lower both this setting and
the VOX mic gain setting. If the VOX is not switching the
speaker on when the central station operator is talking, raise
this setting and lower the VOX mic gain setting. Changing this
setting does not affect speaker volume.
Simon XT Installation Manual