Phone Numbers - Interlogix Simon XT Installation Manual

Hide thumbs Also See for Simon XT:
Table of Contents

Advertisement

Function
Default
Exit extend
On
Secure arming
Off
No arm on low
Off
battery
Quick exit
Off
Downloader
On
enable
Sup protest
Off

Phone numbers

Table 12: Phone Numbers menu
Function
Default
Phone #1
Blank
Phone #2
Blank
Phone #3
Blank
Phone #4
Blank
Downloader #
Blank
38
Description
Determines whether the panel restarts the exit delay time if you
enter the armed premises during the initial exit delay period
(on), or not (off). Turning on this feature allows you to reenter
during the exit delay period, without disarming and then
rearming the system. Turning off this feature requires you to
disarm and rearm the system.
Auto arm must be on for this option to work.
Determines whether an access code is required when arming
the system (on), or not (off). This option does not affect key fob
arm/disarm operation.
Determines whether the system protests arming if a low CPU
battery condition exists (on), or not (off).
Determines whether pressing Disarm when the system is armed
activates the exit delay time to allow exit and reentry without
disarming the system (on), or not (off). This feature is useful if
you want to step outside briefly and return. If the system is
armed and you press Disarm, the panel announces Exit Time is
On, and sounds exit delay beeps. This allows a designated
entry/exit door to open for up to two minutes without causing
alarm. When the door is closed, the beeps stop and the door is
armed again.
Enables programming of system options with downloader
software.
Determines whether the panel protests arming if it has not
received a supervisory signal from any sensor 15 minutes
before arming (on), or not (off). This feature must be turned on
for US installations.
Description
Lets you program up to a 26-digit central monitoring station
receiver/voice event notification phone number for monitored systems.
Phone digits can be 0 to 9, *, #, or a pause (P).
To delete the phone number, press Disarm while editing a phone digit.
To add a pause to the phone number, press Bypass. Pressing OK is
required if you enter fewer than 26 digits.
Lets you program up to a 26-digit phone number for the Enterprise
Downloader.
Simon XT Installation Manual

Advertisement

Table of Contents
loading

Table of Contents