Table of Contents
Advertisement
Time
Hour Code
12:00
Midnight
1:00 AM
2:00 AM
3:00 AM
4:00 AM
5:00 AM
6:00 AM
7:00 AM
SETTING THE KEYPAD LIGHTING
Press [7]-[9]-[1]. The service light will flash.
1.
Press the [1] and [2] keys to lighten or darken the illumination behind the
2.
buttons. It is usually easier to set this adjustment in a darkened room.
The service light will be "on" if the security system requires service. If the service light
is "on", press [7]-[2] to determine the service condition. One or more zone lights will
illuminate indicating what service(s) is required. Call your service provider immediately
for these problems. Below is a listing of what each light means in a service condition.
LIGHT
1
SYSTEM FAULT - Press [1]. The zone light(s) that is illuminated
corresponds to the system fault(s) below:
1
Over Current Fault
2
Siren Trouble
3
Box Tamper
4
Expander Power
Note: Faults 1 & 2 are global in nature and will affect all partitions of a multi-
partition system. Press [#] to return to the 1 of 8 service lights.
2
ZONE TAMPER - Press [2] and the zone light(s) will illuminate showing the
zone(s) that are tampered. Press [#] to return to the 1 of 8 service lights.
3
ZONE LOW BATTERY - Press [3]. The zone light(s) will illuminate showing
which zone(s) has a low battery. This only applies to wireless zones. Press
[#] to return to the 1 of 8 service lights.
4
ZONE LOSS OF SUPERVISION - Press [4] and the zone light(s) will
illuminate showing which zone(s) has loss of supervision. This only applies
to wireless zones. Press [#] to return to the 1 of 8 service lights.
LED Keypad
Time
00
8:00 AM
01
9:00 AM
02
10:00 AM
03
11:00 AM
04
12:00 Noon
05
1:00 PM
06
2:00 PM
07
3:00 PM
SERVICE MENU
Hour Code
08
09
10
11
12
13
14
10:00 PM
15
11:00 PM
PROBLEM
5
Expander Low Battery
6
Expander Box Tamper
7
Expander Trouble
8
Ground Fault
Time
Hour Code
4:00 PM
16
5:00 PM
17
6:00 PM
18
7:00 PM
19
8:00 PM
20
9:00 PM
21
22
23
Advertisement
Table of Contents
