Sales and Service................(306) 653-3200
Downloads/FAQ's................reedsecurity.com
24/7 Monitoring Station.........1-800-268-6870
A
Your ACCOUNT NUMBER:
Simon XT Alarm Systems – QUICK REFERENCE
Disarming your system
1. Press [DISARM] and enter [access code]
2. DISARM button will light up and panel beeps once
Arming doors and windows – STAY mode
NOTE: ensure all doors and windows are closed
1. Press [DOORS+WINDOWS]
2. DOORS+WINDOWS button will light up, panel starts exit delay (60 sec) & sounds exit beeps
in groups of 2.
Arming doors, windows AND motion sensors – AWAY mode
1. Press [DOORS+WINDOWS]
2. Press [MOTIONS] while system is arming
3. DOORS+WINDOWS and MOTIONS button will light up, panel starts exit delay & sounds exit
beeps in groups of 4.
NOTE: for a silent exit press [SILENT] after arming the system.
Changing the Master Code
The master code is needed for programming changes.
1. Scroll up/down to System Programming and press [ENTER]
2. The display shows Enter code. Enter your [MASTER CODE] and press [ENTER]
3. Scroll up/down to Access codes, press [ENTER]
4. Scroll up/down to Master code, press [ENTER], the current value of the code now flashes
5. Enter a [new code] (use correct length), press [ENTER]
6. Press [STATUS] repeatedly to exit
Changing User Codes 1‐8
1. Scroll up/down to System Programming and press [ENTER]
2. The display shows Enter code. Enter your [MASTER CODE] and press [ENTER]
3. Scroll up/down to Access codes, press [ENTER]
4. Scroll up/down to the user code you want to change, press [ENTER]
5. Current value of the code now flashes
6. Enter a [new code (use correct length), press [ENTER]
7. Press [STATUS] repeatedly to exit.
NOTE: Initially, all user codes are blank. A user code can be deleted by pressing [DISARM] while
the code is being changed.
PASSWORD: