Removing And Replacing Power Risers In The 8335-Gtb; Removing A Power Riser From The 8335-Gtb - IBM Power System S822LC Manual

Figure 96. Inserting a PCIe adapter
3. Using your labels, replace any plugs that you removed from the PCIe adapter. Using your labels,
insert the cables into the PCIe adapter.
What to do next
Prepare the system for operation. For instructions, see "Preparing the 8335-GTB system for operation after
you remove and replace internal parts" on page 198.

Removing and replacing power risers in the 8335-GTB

Find information about removing and replacing power risers in the IBM Power System S822LC
(8335-GTB) system.

Removing a power riser from the 8335-GTB

Find information about removing power risers in the IBM Power System S822LC (8335-GTB) system.
Before you begin
Power off the system and place it in the service position. For instructions, see "Preparing the 8335-GTB
system to remove and replace internal parts" on page 195.
81
Removing and replacing parts in the IBM Power System S822LC (8335-GTB)