IBM Power System S822LC Manual page 70
Hide thumbs
Also See for Power System S822LC:
- Servicing (146 pages) ,
- Installing the system and ordered parts (140 pages) ,
- Technical overview and introduction (80 pages)
Table of Contents
Advertisement
Figure 64. Location of the connectors for the front USB cable and connector and the power switch and cable
4. Release each cable from the retaining clip on the inside wall of the system.
5. Pressing the latch release on the connector, disconnect the front USB cable (A). See Figure 65 on page
55.
Note: The latch release on the connector must be depressed before you unplug the cable. Failure to
do so might damage the cable and the connector.
54
Power Systems: Servicing the IBM Power System S822LC (8335-GTB)
Advertisement
Table of Contents
