IBM Power System S822LC Manual page 212

(L007)
CAUTION: A hot surface nearby. (L007)
6. Stop the system. For instructions, see "Stopping the 8335-GTB system" on page 199.
7. If applicable, open the rack door at the rear of the system.
8. Disconnect the power source from the system by unplugging the system. For instructions, see
"Disconnecting the power cords from an 8335-GTB system" on page 211.
Note: The system might be equipped with redundant power supply. Before you continue with this
procedure, ensure that all power to your system is disconnected.
(L003)
1
or
!
1
2
or
3
1
or
196
Power Systems: Servicing the IBM Power System S822LC (8335-GTB)
2
4
2