Figure 214. Reconnecting the water hoses
6. Repeat step 2 on page 186 through step 5 on page 186 for each system in the rack.
7. Reconnect the power cords to the system. For instructions, see "Connecting the power cords to an
8335-GTB system" on page 213.
8. Repeat step 7 for all the systems in the rack.
9. Start the system. For instructions, see "Starting the 8335-GTB system" on page 199.
10. Repeat step 9 for all the systems in the rack.
11. Verify the installed part. See Verifying a repair (www.ibm.com/support/knowledgecenter/
POWER8//p8ei3/p8ei3_verifyrepair.htm).
Removing and replacing parts in the IBM Power System S822LC (8335-GTB)
187