Removing The Secure Router 2330 Top Cover - Avaya Secure Router 4134 Hardware Installation

Installing Avaya Secure Router 2330/4134 hardware components

Removing the Secure Router 2330 top cover

Use the instructions in this procedure to remove the Secure Router 2330 top cover.
Prerequisites
• Ensure you have a SCIM module ready to install before opening the chassis top cover.
• Ensure you have a Phillips #1 screwdriver.
• Ensure the Secure Router 2330 is powered off.
Procedure steps
1. Remove the three screws securing the left-hand side bracket to the chassis and the
2. Remove the three screws securing the left-hand side of the top cover to the
86 Installation — Hardware Components
top cover.
See the following figure for reference.
chassis.
Comments? infodev@avaya.com
August 2013