Removing The Power Filler Panel - Avaya 8300 Installation Manual

Procedure steps
1. Add the total input power consumption for all components (modules and fan tray
2. Refer to the output power rating of the power supply based on the input connection.
3. Assess the redundant power supply needs. If one power supply satisfies the system

Removing the power filler panel

A power filler panel maintains the proper cooling airflow in the Ethernet Routing Switch 8300
Series chassis.
Procedure steps
1. Using a Phillips screwdriver to loosen the two captive screws that fasten the power
2. Pull the power filler panel out of the Ethernet Routing Switch 8300 Series chassis.
Installation — AC Power Supply
assemblies).
If either the individual or the combined power requirements for the components
exceed the power supply rating, you need to add another power supply to
configure.
power-consumption needs, a second power supply provides redundancy. If two
power supplies satisfy the system power-consumption needs, the third power
supply provides redundancy.
filler panel to the chassis until the screws are free of threads in the chassis frame.
Removing the power filler panel
May 2011 27