Connecting The Console Port Cable - Avaya Secure Router 4134 Hardware Installation

Installing Avaya Secure Router 2330/4134 hardware components
9. Replace the terminal cover screws. The maximum tightening torque for terminal
10. Use a cable tie to bind the wires. Use at least four cable ties spaced at four-inch
11. Attach the other ends of the leads to a – 48 V DC power source.

Connecting the console port cable

You use the console port to perform initial system configuration.
The following figure shows a laptop connected to the console port on the rear of the Secure
Router 4134.
Figure 32: Connecting a local terminal to the console port
The following figure shows a laptop connected to the console port of the Secure Router
2330.
66 Installation — Hardware Components
cover screws is 4 in-lb (0.45 N-m).
intervals. Place the first tie within six inches of the terminal block. Position the bound
wires to prevent accidental contact when passing by the Secure Router 4134.
Comments? infodev@avaya.com
August 2013