Adsl2+ Small Module - Avaya Secure Router 4134 Hardware Installation

LED
SFP PORT
STATUS

ADSL2+ Small Module

Secure Router 2330/4134 supports the following two ADSL2+ WAN interface modules:
• 1-port ADSL2+ Annex A
• 1-port ADSL2+ Annex B
The 1-port ADSL2+ Small Modules are hot swappable interface modules. With the hot swap
feature, you can replace one module with another module of the same type while the system
is operating, without affecting the system functionality. For information about the steps required
to hot swap Secure Router 2330/4134 interface modules, see
modules on page 60.
You can install the 1-port ADSL2+ Small Modules in any of the Small Module slots on the
Secure Router 2330/4134 chassis. The following figure shows the 1-port ADSL2+ Annex A
Small Module.
Figure 24: 1-port ADSL2+ Annex A Small Module
The following figure shows the 1-port ADSL2+ Annex B Small Module.
Installation — Hardware Components
• Solid Orange: Link established at 1000 Mbps
• Blinking Green or Orange: Receiving or transmitting traffic
LEDs are integrated into each port. Status of each interface:
• Off: Link not connected or Link Fail
• Solid Orange: Link established at 1000 Mbps
• Blinking Orange: Receiving or transmitting traffic
Interface modules for the Secure Router 2330/4134
Description
Hot swapping interface
August 2013 45