Internal System Compact Flash - Avaya Secure Router 4134 Hardware Installation

Avaya Secure Router 2330/4134 hardware components fundamentals
Figure 28: Internal PVM
The PVM supports up to 128 channels, depending on the voice codec and the voice license
agreement you use. For information about the supported voice codecs and the voice-related
licensing, see Avaya Secure Router 4134 Configuration — SIP Media Gateway
(NN47263-508).
The PVM is an internal module and is not directly connected to any external interface.
Important:
You cannot enable the management port on the rear of the Secure Router 4134 (Ethernet
0/0) if you have a PVM installed (this is related to hardware design). Ensure you use Ethernet
0/1, 0/2, 0/3, or 0/4 for management if you use a PVM in the router.
The PVM is field-replaceable, but is not hot swappable.

Internal system compact flash

The internal compact flash contains the system image. This slot is identified in system software
as CF0.
50 Installation — Hardware Components
Comments? infodev@avaya.com
August 2013