Connecting Dc Power - Avaya Secure Router 4134 Hardware Installation

2. Insert the male end of the power cord in a standard 110/220 V AC power outlet.

Connecting DC power

Important:
The information in this section is applicable to the Secure Router 4134 only.
Average time to install one DC power cable: 3 minutes.
Electrostatic alert:
ESD
Always wear an ESD-preventative wrist strap when connecting cables or performing
maintenance on a Secure Router 4134. Ensure that the wrist strap makes contact with your
skin.
Caution:
As a general safety precaution, ensure you provide DC power through either a fuse or DC
circuit breaker with a maximum rating of 12 amps.
Installation — Hardware Components
Caution:
Ensure you use an appropriately rated AC power cord only. Do not use an
extension cord.
Connecting Secure Router 2330/4134 power cables
August 2013 63