Installing A Small Module In The Secure Router 4134 Voice Carrier Medium Module - Avaya Secure Router 4134 Hardware Installation

4. Align the Large Module with the slot and the slot module guides on the outside edges
5. Slide the module into the chassis until its connector panel touches the chassis back
6. Push gently, but firmly, to seat the connector on the interface module in the chassis
7. Ensure the levers on the module are flush with the front panel of the Secure Router
8. Using a Phillips screwdriver, tighten the two captive screws to secure the module
Installing a Small Module in the Secure Router 4134 Voice Carrier
Medium Module
Ensure you securely install the Voice Carrier Medium Module in the Secure Router 4134
chassis before installing Small Modules in the Voice Carrier Medium Module. For instructions
to install the Voice Carrier Medium Module in the chassis, see
the Secure Router 4134
If you are working with 2- or 4-port FXS or FXO Small Modules, ensure you read the safety
messages related to the FXS and FXO interface modules. See
(FXS) Interface Modules
Modules on page 12.
Average time to install a Small Module in the Voice Carrier Medium Module: 1 minute.
Installation — Hardware Components
of the slot.
panel.
back panel.
4134.
to the chassis.
on page 58.
on page 11 and
Installing a Medium Module on
Foreign Exchange Office (FXO) Interface
Installing the interface modules
Foreign Exchange Station
August 2013 59