Replacing The Secure Router 4134 Internal Compact Flash - Avaya Secure Router 4134 Hardware Installation

Installing Avaya Secure Router 2330/4134 hardware components
6. Firmly grasp the DIMM by its edges and pull the DIMM from the slot.
7. If you are replacing the DIMM, also see

Replacing the Secure Router 4134 internal Compact Flash

Use the instructions in this section if you must replace the internal Compact Flash. This internal
device is not hot swappable.
Average time to replace the internal Compact Flash: 1 minute
Caution:
Do not open the Secure Router 4134 service access panel while the unit is powered.
Important:
The internal Compact Flash that ships with the Secure Router 4134 contains the system
image.
Prerequisites
• Ensure you have a replacement Compact Flash ready to install.
• Ensure you have a Phillips #2 screwdriver.
84 Installation — Hardware Components
Module on page 81.
If you are not installing a DIMM at this time, replace the module in the slot, or place
a slot cover plate over the slot from which you removed the module. Store the
Mediation Server Module in an antistatic bag until you are ready to install it in the
chassis.
Comments? infodev@avaya.com
Installing a DIMM on the Mediation Server
August 2013