Ac Power Specifications; Ac Power Cord Specifications; Table 25: Ac Power Supply Electrical Specifications; Ac Plug Types - Juniper BX7000 Hardware Manual

AC Power Specifications

AC Power Cord Specifications

AC Power Supply Electrical Specifications
Table 25 on page 77 lists the AC power supply electrical specifications.

Table 25: AC Power Supply Electrical Specifications

Item
Maximum output power for each power supply
AC input voltage
Maximum input current
AC input frequency
Each AC power supply has a dedicated AC power feed. Use an AC power cord of voltage rating 250
V and current rating of at least three amperes. The appliance coupler at the female end of the cord
inserts into the appliance inlet on the faceplate of the AC power supply. The coupler is type C13 as
described by International Electrotechnical Commission (IEC) standard 60320. The plug at the
male end of the power cord fits into the power source receptacle that is standard for your
geographical location.
Table 26 on page 77 provides AC power cord specifications and Figure 33 on page 77 depicts the
plug types for AC power cord provided for each country.
Table 26: AC Power Cord Specifications
Country
Australia
Europe (except Italy and
United Kingdom)
Italy
Japan
North America
United Kingdom
Figure 33: AC Plug Types
Australia Europe
For information about the AC power supply, see "AC Power Supply"
on connecting the power cord and grounding cable during initial installation, see "Connecting the
on page 37
Grounding Wire"
Description
50 W
Operating range: 100 to 240 VAC (nominal)
1.25 A
50–60 Hz (nominal)
Electrical Specification
240 VAC, 50 Hz AC
220 or 230 VAC, 50 Hz AC
230 VAC, 50 Hz AC
110 VAC, 50 or 60 Hz AC
120 VAC, 60 Hz AC
240 VAC, 50 Hz AC
Italy Japan
and "Providing Power to the Gateway"
Power Guidelines, Requirements, and Specifications
Plug Type
SAA/3
CEE 7/7
CEI 23-16
JIS 8303
NEMA 5-15P
BS1363
UK
North America
on page 12
. For instructions
on page 39
.
:
77