Type B Connector Pinouts For Usb Console Port; Type A Connector Pinouts For Usb Flash Port - Juniper BX7000 Hardware Manual

Type B Connector Pinouts for USB Console Port

Type A Connector Pinouts for USB FLASH Port

Table 32: RJ-45 Connector Pinouts for T1/E1 Port
RJ-45 Pin
4
5
6
7
8
The console port below the USB label on the front panel labeled CONSOLE is a Type-B receptacle
that accepts an USB cable. The console port connects the gateway to a management console. The
ports are configured as data terminal equipment (DTE).
Table 33: USB Type B Connector Pinouts
Pin
1
2
3
4
The USB port on the front panel labeled FLASH is a Type-A receptacle that connect to any
memory stick or auxiliary unit.
Signal
TX Tip
TX Ring
No Connect
No Connect
No Connect
Signal
+5
–Data
+Data
GND
Type B Connector Pinouts for USB Console Port
:
107