Wall-Mounting Kit; 23-Inch Rack-Mounting Kit; Installation Kit Contents - Juniper BX7000 Hardware Manual

CHAPTER 3: Unpacking and Inspecting the Gateway

Wall-Mounting Kit

23-inch Rack-Mounting Kit

24 Inspecting the Gateway Components and Accessories
Document any damage noted during your inspection.
Confirm that the gateway has the correct number and type of components for your ordered
configuration.
If any part is missing, contact a customer service representative.
The cardboard box contains the gateway and the following parts listed in Table 11 on page 24.
Table 11: Gateway Parts List
Part
19 in. mounting brackets
Product warranty
Getting Started Guide
Cable management brackets
EULA
You can order an installation kit to use during the installation of the gateway. Table 12 on page 24
lists the parts in the installation kit.
Table 12: Installation Kit Contents
Part
1 GB USB flash drive
USB console cable
RJ-45 Console/Ethernet cable
T1 loopback plug
Ethernet loopback plug
You can order a wall-mounting kit. The parts of a wall-mounting kit are listed in Table 13 on
page 24.
Table 13: Parts of a Wall-Mounting Kit
Parts
Wall-mounting bracket
Nylon plug
Wall-mounting screws (3.5 X 25 mm)
Note: The screws provided in the wall-mounting kit can be used for wooden or plastic wall. Use
Type 5 self tapping screws for other walls.
You can order a 23-inch rack-mounting kit. The parts of a 23-inch rack-mounting kit are listed in
Table 14 on page 24.
Table 14: Parts of a 23-inch Rack-Mounting Kit
Parts
23-in. mounting bracket assembly
M5 X 10 screws - (100 degree) Counter
sunk
Quantity
2
1
1
2
1
Quantity
1
1
1
1
1
Quantity
1
3
3
Quantity
2
4
Copyright © 2010, Juniper Networks, Inc.