List Of Technical Publications; Obtaining Documentation; Table 3: Bx7000 Multi-Access Gateway Documentation - Juniper BX7000 Hardware Manual

Convention
# (pound sign)
[ ] (square brackets)
Indention and braces ( { } )
; (semicolon)
gateway

List of Technical Publications

Table 3: BX7000 Multi-Access Gateway Documentation

Document
BX7000 Multi-Access Gateway Hardware
Guide
BXOS Configuration Guide
BXOS CLI Users Guide and Command
Reference
BX7000 Multi-Access Gateway Getting
Started Guide

Obtaining Documentation

Description
Indicates a comment specified on the same line
as the configuration statement to which it applies.
Identify a level in the configuration hierarchy.
Enclose a keyword and variable at specific
hierarchy levels. You can substitute one or more
values for the variable.
Identifies a leaf statement at a configuration
hierarchy level.
Refers to BX7000 Multi-Access Gateway
Table 3 on page xv lists the BX7000 Multi-Access Gateway documentation.
To configure and operate the BXOS software, use the configuration statements and operational
mode commands documented in the BXOS Configuration Guide and BXOS CLI Users Guide and
Command Reference.
Description
Provides a detailed hardware description of the gateway. This guide:
Explains how to unpack, install, mount, access, and maintain the gateway.
Explains the various hardware components such as power supply, chassis, and ports.
Provides troubleshooting of the hardware-related issues.
Provides a detailed software description of the BXOS software. This guide:
Explains the configuration statements used to configure various properties of the
gateway.
Describes how to configure the basic system properties, protocols, interfaces,
pseudowires, and tunnels.
Explains statement hierarchies and parameters used in configuration.
Provides a detailed description of all the configuration mode and operational mode
commands. This guide:
Explains how to start the CLI and the components of the CLI.
Contains information about the commands used to set the gateway properties (set
commands) and the commands used to view the outputs (show commands).
Provides an overview on installing the gateway. This guide:
Explains how to quickly set up the gateway.
Contains the basic steps to install the gateway and establish the basic gateway
connectivity.
To obtain the most current version of all Juniper Networks technical documentation, see the
products documentation page on the Juniper Networks web site at: http://www.juniper.net/
To order a documentation CD, which contains this guide and other Juniper Networks technical
documents, contact your sales representative.
Examples
rsvp {# Required for dynamic MPLS only}
[edit]
protocols {
ospf {
area 1.1.1.1 {
interface ge-1/0/1 {
admin-state enable;
}
}
}
}
List of Technical Publications
About This Guide
xv