Parameterization - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

8.3.3.2

Parameterization

Parameterization menu structure
The menus that you can call from the "Parameterization" menu using the function keys are
described below.
Figure 8-6
Calling up the parameterization menu
1. Press the "MENU" key.
2. Press the <▼> function key to select the "Parameterization" row. Press the <OK> function
3. Press the <▲> or <▼> function key to select the desired function. Press the <OK> function
Individual DO
The "Individual DO" function opens the parameter lists for the individual DriveObjects (DO).
1. Press the <▲> or <▼> function key to select the desired DO. Confirm the selection with <OK>.
2. Press the <▲> or <▼> function key to select the desired parameter. Alternatively, you can
3. Press the <Change> function key to open the change window of the parameter. You can
4. Press the <Help> function key to fetch information about the selected parameter.
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
Parameterization menu structure
key to confirm the selection.
key to confirm the selection.
select the parameter by entering the parameter number on the keypad. Parameters with
identical functions may exist with the same parameter number in more than one drive object
(e.g. p0005).
change the parameter by assigning values or by making a selection from a list.
8.3 Operation via the AOP30 operator panel
Operation
125