Project Navigation; User Interface - Parameterization; Modules In The Hardware Catalog - Siemens SINAMICS S120 Getting Started

Startdrive commissioning tool

3.2 User interface - parameterization

3.1.2

Project navigation

Description
The project tree is used to display and edit components and project data.
After they have been inserted, drives are hierarchically displayed as follows in the project
tree:
Figure 3-2
The most important information of a project:
● Project name
● Name of the new added drive
● Device configuration of the new added drive
● The created drive objects of a drive (automatic speed control, infeed, drive axis...)
● Trace recording of drive
3.2 User interface - parameterization
3.2.1

Modules in the hardware catalog

As soon as the device configuration is active, a hardware catalog can be displayed/hidden at
the right-hand edge of the program window. The device configuration automatically becomes
active as soon as a drive device was inserted. The required SINAMICS modules can be
transferred from the hardware catalog into a project and specified.
32
Example: Project tree
Getting Started, 12/2018, 6SL3097-5AG30-0BP0