Connecting The Interface Terminals; Connecting The Water Circuits - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

5.8

Connecting the interface terminals

Connecting the interface terminals of several cabinets
If several cabinets are set up as one unit, the interface terminals of the cabinets must be
connected with each other.
Depending on the design of the cabinet, sockets for connecting the interfaces are located on
the left-hand side (viewed from the front), below or above. The connectors are provided at the
same position on the other cabinet.
5.9

Connecting the water circuits

Eye and skin injuries caused by deionized water
Deionized water is harmful to eyes and skin and can damage surfaces.
● Therefore, use appropriate protective clothing for all work on the drive. However, if your
● If deionized water leaks out, eliminate the source of the problem and remove the liquid from
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
CAUTION
eyes or skin do come into contact with deionized water, rinse the affected area thoroughly
with tap water as soon as possible.
the surfaces affected.
Installation
5.9 Connecting the water circuits
83