Figure 5-1 Connecting The Transport Units - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

A basic unit consists of two transportation units (modules). There is a side panel on the left-
hand side of each transportation unit. Mount the side panels of each transportation unit to the
correct side. To do so, proceed as follows:
1. Arrange the transportation units in accordance with the specifications provided in the
2. Make sure that on the left-hand transportation unit
3. If the drive comprises more than two transportation units, then disassemble the side panels
4. Mount the side panel of the last transportation unit from the left to the right-hand side.
Examples of the arrangement of the side panels
A
B
Figure 5-1
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
dimension drawings.
hand side.
of the following transportation units.
2 transport units
4 transport units
Connecting the transport units
②
①
Re-cooling unit
②
Transport unit, x = remove the rear panel - it is not required
5.3 Preparations
the side panel is mounted on the left-
Installation
77