Maintenance
9.5 Repair
9.5.2
Replacing the AVT combination module
Removing the AVT combination module
1. Follow "the five safety rules (Page 17)".
2. Release the control cables
3. Remove the four fixing screws
Installing the AVT combination module
1. Use the screws
2. Reconnect the control lines
194
Figure 9-10
Example of an AVT combination module
②
to secure the AVT combination module.
①
. Carefully ensure that you do not kink the fiber optic cables.
②
of the AVT combination module.
①
. Do not bend the fiber-optic conductors.
Operating Instructions Rev.201910281250 MUSTER
SINAMICS GM150 6SL3835-2LN44-2AA0