Maintenance
9.5 Repair
4. Remove the screwed connections for the phase connections
5. To remove the upper phase module, unscrew the motor voltage sensing module. Release
200
IGCT phase module and the drive cabinet on the rear of the drive.
Figure 9-17
Busbar package
①
the side screws
. Ensure that the connected fiber-optic cable and connecting cable are
not damaged.
Figure 9-18
Motor current acquisition module
⑧
on the interfaces with the
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER