Figure 9-23 Changing Device: Joining The Roller Tracks - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

5. Allow the phase module to slide down the roller tracks by unscrewing the connections at the
6. Pull the phase module onto the stacker. Secure the module with the two stop brackets
7. Remove the screwed connections for the roller tracks, which are now joined together.
8. Place the defective phase module down in a suitable place (e.g. on the wooden beams you
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
lugs.
Figure 9-23 Changing device: joining the roller tracks
Figure 9-24 Changing device: stop brackets
used for placing the changing device on the stacker).
Maintenance
9.5 Repair
⑪
.
203