Isolation Amplifiers For Optional Analog Inputs (Option E86); Isolation Amplifiers For Optional Analog Outputs (Option E87); Can Bus Interface (Option G20) - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

Description
3.6 Description of options
This option contains the following equipment/features:
● Strengthened mechanical cabinet design
● Handrail below the operator panel
● Mechanical cabinet door locking
● Cabinet design in an IP44 degree of protection
● Anti-condensation heating
The drive can be welded to the ship's hull structure.
3.6.4

Isolation amplifiers for optional analog inputs (option E86)

This option provides two isolation amplifiers if an additional TM31 Terminal Module is provided
as an extension of the customer interface and the TM31 analog inputs are to be used with a
higher-level control level for communication purposes. Multifunction interface converters with
the following adjustment range are used:
● 0 V to 10 V
● 0 mA to 20 mA
● 4 mA to 20 mA
The range must be set on the isolating transformer.
3.6.5

Isolation amplifiers for optional analog outputs (option E87)

This option provides two isolation amplifiers if an additional TM31 Terminal Module is provided
as an extension of the customer interface and the TM31 analog inputs are to be used with a
higher-level control level for communication purposes. Multifunction interface converters with
the following adjustment range are used:
● 0 V to 10 V
● 0 mA to 20 mA
● 4 mA to 20 mA
The range must be set on the isolating transformer.
3.6.6

CAN bus interface (option G20)

The CBC10 communication module allows the drive to be connected to a CAN bus.
Additional information about the communication module is provided in document
"Supplementary component descriptions
view/109768128)".
48
(https://support.industry.siemens.com/cs/ww/en/
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER