Symmetricom EDGE CLOCK 1000 User Manual page 178

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
Table 6-7. Alarm Codes (Continued)
Event ID Description
CLK Local oscillator in the specified
BRDG IOC is in Bridging mode.
CLK Local oscillator in the specified
HOLD IOC is in Holdover mode.
CLK Local oscillator in the specified
FREE IOC is in the Free-run mode.
CLK Local oscillator in the specified
WARM IOC is in the Warm-up mode.
SYNTH Synthesizer generating the
EOR output frequency has reached a
defined End-of-Range for the
oscillator.
IOC2 Communication alarm with IMC
COMM and IOC2.
IOC2TO Communication alarm from
1 COMM IOC2 to IOC1.
IOCFAIL Summary alarm for IOC
hardware failures not specified
in other alarms.
BTBCK All BesTime backup sources
UP are unusable to the BesTime
engine.
CLK Local oscillator in the specified
BRDG IOC is in Bridging mode.
CLK Local oscillator in the specified
HOLD IOC is in Holdover mode.
CLK Local oscillator in the specified
FREE IOC is in the Free-run mode.
CLK Local oscillator in the specified
WARM IOC is in the Warm-up mode.
SYNTH Synthesizer generating the
EOR output frequency has reached a
defined End- of-Range for the
oscillator.
178 TimeProvider User's Guide
AID Service
TYPE Affecting
EQPT NSA
EQPT SA
EQPT SA
EQPT SA
EQPT SA
AID = IOC2
EQPT NSA
EQPT NSA
EQPT SA
EQPT NSA
EQPT NSA
EQPT SA
EQPT SA
EQPT SA
EQPT SA
AID = GPS
Alarm Level
SSU PRR
Mode Mode Mode
NA NA MJ
MJ MJ MJ
MJ MJ MJ
MN MN MN
MJ MJ MJ
MN MN MN
MN MN MN
MJ MJ MJ
NA NA NA
NA NA MJ
MJ MJ MJ
MJ MJ MJ
MN MN MN
MJ MJ MJ
097-58001-02 Revision G – April 2008
SUB