3.5.4.13 Removing the Gear Unit
1) Remove the drive plate (small) [1].
- 2 screws [2]
2) Remove the 2 gears [1].
3) While freeing the claw, detach the gear unit [2].
[2]
3.5.4.14 Removing the Tooth-Missing Gear
1) Remove the gear support [1].
- 2 screws [2]
[1]
2) Remove the spring [1].
3) While freeing the claw, detach the tooth-missing gear [2].
[2]
[1]
F-3-208
[1]
[2]
F-3-209
[1]
F-3-210
[2]
F-3-211
3.5.4.15 Removing the Manual Stay
1) Release the lower claw [2] of the solenoid cover [1], and remove the
0012-1692
solenoid cover.
2) Remove the 3 screws [3]. While watching the sensor flag carefully, re-
move the manual stay [4].
3.5.4.16 Removing the Paper Feed Guide
1) Remove the feed guide [1].
- 1 screw [2]
0012-1693
3.5.4.17 Removing the Paper Feed Roller
1) Lift the left side of the paper feed roller [1], and slide it to detach.
[2]
[1]
F-3-212
[4]
[3]
F-3-213
[1]
[2]
F-3-214
[1]
F-3-215
Chapter 3
0012-1695
[1]
[2]
0012-1698
0012-1700
3-33