Removing The Cassette 1 Lifter Drive Unit - Canon imageRUNNER C1335 Series Service Manual

4
Disassembly/Assembly > Pickup/Feed System > Removing the Cassette 1 Lifter Drive Unit > Preparation
NOTE: How to assemble the Delivery/Reverse Unit
Be sure to lift up the Paper Full Detection Flag [1] to install the unit.
[1]
4 Disassembly/Assembly > Pickup/Feed System > Removing the Cassette 1 Lifter Drive Unit > Preparation

Removing the Cassette 1 Lifter Drive Unit

■ Preparation
1) Remove the Rear Cover 1(Refer to page 4-34).
2) Remove the Left Upper Cover (to be removed for models equipped with a fax)
(Refer to page 4-36).
3) Remove the Fax Speaker Unit (to be removed for models equipped with a fax)
(Refer to page 4-100).
4) Remove the Fax Unit (to be removed for models equipped with a fax)(Refer to page 4-101).
5) Remove the Main Controller Unit(Refer to page 4-81).
6) Remove the Low-voltage Power Supply PCB Unit(Refer to page 4-93).
7) Remove the DC Controller PCB Unit(Refer to page 4-86).
8) Remove the Secondary Transfer High-voltage PCB/Developing High-voltage PCB Unit
(Refer to page 4-88).
F-4-443
4-167
F-4-444
4-167