Drive-Cliq Signal Cables Without 24 V Dc Cores - Siemens SINAMICS S120 Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Table 12- 11 Overview of pre-assembled DRIVE-CLiQ signal cables

Type of DRIVE-CLiQ signal

6SL3060-4A..

6FX2002-1DC..

6FX5002-2DC00..

to .. -2DC20..

6FX8002-2DC00..

to .. -2DC20..

6FX5002-2DC30..

6FX8002-2DC30..

DRIVE-CLiQ signal cables without 24 V DC cores

Pre-assembled DRIVE-CLiQ signal cables without 24 V DC cores are used to connect

components with DRIVE-CLiQ connection, which have a separate or external 24 V DC

power supply. They are mainly intended for use in control cabinets. The signal cables are

available with RJ45 connectors in degrees of protection IP20 and IP67.

Table 12- 12 Actual lengths of the DRIVE-CLiQ jumpers for Line Modules and Motor Modules

DRIVE-CLiQ bridge

Cable length without connector

Cable lengths from 600 mm and higher are used to connect to other applications (e.g.

establish a 2nd line in the drive line-up, establish wiring in a star configuration etc. )

Figure 12-24 DRIVE-CLiQ signal cables without 24 V DC cores (IP20)

Booksize Power Units

Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8

Degree of protection

(DRIVE-CLiQ)

Cable length L

Cabinet design and EMC Booksize

12.7 Connection systems

Connector type

DRIVE-CLiQ /

Show Quick Links

Table of Contents