Service and Support Booksize
14.1 Replacing the fan
2. Attach the fan cover.
3. Press on the fan cover until the catches engage.
Replacing the fan for components, size 300 mm
Installing the fan module on 300 mm wide components is described in Chapter "Installation"
of the respective component. The fan module is removed in the inverse sequence to
installing.
14.1.3
Replacing the fan on an Active Interface Module
Replacing the fan in an Active Interface Module, 16 kW
1. Open the fan cover.
To do this, release the combination screws M5 (3 Nm).
790
2. Attach the fan cover (the lugs first).
3. Press on the fan cover until the catches engage.
2. Open the fan cover and release the connector.
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
Booksize Power Units