Installing The Reinforced Dc Link Busbars - Siemens SINAMICS S120 Manual

Accessories
11.3 Reinforced DC link busbars
11.3.5

Installing the reinforced DC link busbars

Required tools:
● Torx screwdriver T20 for DC link screws (Torx slot)
Table 11- 13 Installing the reinforced DC link busbars
1. Install the reinforced DC link busbars, starting at the left.
2. Attach the DC link busbars using the original M4x20
screws at the right-hand side of the component.
Do not tighten the screws with their final tightening torque
yet.
624
3. Install the reinforced DC link busbars, and attach these at
the right-hand side of all of the remaining components.
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
Booksize Power Units