Electrical Installation; General Instructions; Configuration Of Connectors - Roland udk20 Manual

Electrical installation

5 Electrical installation
Pos: 40 /Doppelblech/Geräte/UDK20/5 Elektrische Installation/Elektrische Installation - allgemein @ 1\mod_1306917399195_501.doc @ 9433 @ 2 @ 1
5.1

General instructions

The sensor cables should be kept as short as possible in order to minimize the influence of
electromagnetic noise. Cable shields must be connected according to the connection diagrams
only and should not have any additional connections.
Pos: 41 /Doppelblech/Geräte/UDK20/5 Elektrische Installation/Steckerbelegung @ 1\mod_1306917398226_501.doc @ 9427 @ 2 @ 1
5.2

Configuration of connectors

UDK20-x-x-S in industrial enclosure
52
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series UDK20
Attention Damaged cable installations can result in additional electrical
connections. This can disturb the measured values.
Manual
B0048991 / Rev. 1.3