Frymaster Enodis BIELA14 LOV Series Operator's Manual page 87

7.2.4 Auto Top Off Problems
Problem
Frypots won't top
off.
The yellow JIB low
light won't
illuminate.
One vat tops off but
other vats fail to top
off.
Probable Causes
A. Auto top off power switch is off.
B. Pump defective or over tightened.
A. Failed transformer
B. Three-phase power in the contactor
box left of the JIB is not present.
C. Loose wire connection
A. Failed solenoid
Corrective Action
A. Verify that the auto top off
power switch is switched on.
The switch is located behind the
JIB on the left side of the auto
top off control box.
B. Call your FASC.
This indicates a problem that is
beyond the scope of operator
troubleshooting. Call your FASC.
This indicates a problem that is
beyond the scope of operator
troubleshooting. Call your FASC.
7-9