Frymaster Enodis BIELA14 LOV Series Operator's Manual page 44

2. Use the t and ubuttons to scroll to fill pot
from bulk (see Figure 192).
3. With fill pot from bulk displayed, press
(1 yes) button to continue (see Figure 193).
the
Computer displays fill pot from bulk,
alternating with yes no (see Figure 194).
(yes) button to continue (see Figure
4. Press the
195).
The system verifies
The bulk oil inlet valve opens and the bulk pump is
energized. The bulk oil refill pump uses a momentary
switch. It only pumps as long as the switch is depressed.
Computer displays fill pot from bulk (see
Figure 196).
5. Press and hold the
to refill using the bulk oil refill. When the vat is filled
to the lower fill line, release the
6. Press the (2) button to exit (see Figure 198).
The computer displays off (see Figure 199).
7. Press the soft power button to begin heating the oil
(see Figure 200).
If the oil temperature is below setpoint, the computer
displays low temp (see Figure 201).
The system then checks the oil level, topping off if
necessary.
When the fryer reaches setpoint and the computer display
changes to the product or dashed lines, the fryer is ready
for use (see Figure 202).
the drain is
(yes) button (see Figure 197).
(1 yes) button.
closed.
Figure 197
Figure 199
4-28
Figure 192
Figure 193
Figure 194
Figure 195
Figure 196
Figure 198
Figure 200
Figure 201
Figure 202