Frymaster Enodis BIELA14 LOV Series Operator's Manual page 25

4.9 Fryer Setup Mode Programming
The computer, upon initial power up, when changing out a computer or accessed from Level 1,
enters setup mode. These parameters need to be set to allow the auto filtration, logs and other
functions to operate correctly. The setup sets the time, date, date format, language, fryer type, vat
type, oil system type and the temperature scale from F° to C°. These settings should only be changed
by a technician.
On initial power up the computer displays OFF
(see Figure 6).
1. Press either soft power button (see Figure 7) or
with the computer OFF (see Figure 6), enter
Level 1 programming mode by pressing the
TEMP and INFO buttons (see Figure 8)
simultaneously until LEVEL 1 is displayed (see
Figure 9).
2. The computer displays FRYER Setup if
initially powering up the computer and/or
ENTER CODE if programming through
Level 1(see Figure 10).
3. Enter 1234 (see Figure 11).
If initially powering up the computer skip to step 6,
otherwise if programming through Level 1 continue
to the next step.
The computer displays level 1 program
for three seconds and sounds an alert (see Figure
12).
The computer then displays Product
selection (see Figure 13).
4. Press the u button (see Figure 14) to scroll to
FRYER SETUP (see Figure 15).
Figure 8
1
Figure 14 Figure 15
4-9
Figure 6
Figure 7
Figure 9
Figure 10
2
3
4
(1234)
Figure 11
Figure 12
Figure 13