Frymaster Enodis BIELA14 LOV Series Operator's Manual page 23

4.7 M2007 Button Description and Functions
4.7.1 Navigation Buttons
The menu on the M2007 uses
navigate the various menus and submenus (see Figure 1).
The displays on some menu items scroll text too long to fit
on a single screen.
additional characters to display scrolling message (see
example in Figure 2).
In other illustrations the displays (see Figure 3) are
cropped for clarity (see Figure 4).
When programming, the left screen shows a menu or
submenu item. The right screen is for data entry. Data is
entered with alpha-numeric characters, scrolling through
lists or by toggling between choices.
During programming if a button is not pushed within one minute, the computer returns to operation
mode.
4.7.2 Filter, Temperature and Info Buttons
< FLTR FLTR >
The and
vat fryer on demand, while the right
FLTR
buttons, if pressed once will display the amount of cook cycles remaining until a filtration
FLTR
prompt. When the
TEMP
displayed. The
temperature on both sides. If the fryer is off, the display shows the current versions of software. If
TEMP
the button is pressed twice while the fryer is on, it shows the setpoint temperatures of the
INFO
vats. The button (see Figure 1), if pressed once, shows the recovery time for each vat from
the last test. Recovery displays the time required for the fryer to raise the temperature of the oil 50°F
(28°C) between 250°F (121°C) and 300°F (149°C). If the
three seconds it shows information such as usage, filter statistics and last cook cycles (see page 4-51
for more details on the
4.7.3 Cook Cycle and Selection Buttons
The buttons are dual-function buttons shared with
1 2
the number and
below the LED displays (see Figure 5). Use these buttons
to select or cancel functions. The
out of and quit submenus.
34 tu
and
Some illustrations here show
buttons (see Figure 1) are used to filter the left and right vats of a split
FLTR >
button is pressed twice, the date and time of the last filter will be
button, if pressed once while the fryer is on, displays current vat
INFO
button).
buttons. They are located directly
button is used to back
buttons to
Left Display
button is used to filter a full vat on demand. The
INFO
button is pressed and held for
4-7
Figure 1
Figure 2
Figure 3
Right Display
Figure 4
Figure 5