Frymaster Enodis BIELA14 LOV Series Operator's Manual page 54

4.13.1 PRODUCT COMP MODE
The product comp mode allows the product compensation (sensitivity) to be changed. Some menu
items may need an adjustment, depending on their cooking characteristics.
changing the product compensation, as it could have an adverse affect on the products cooking
cycles. By default the product compensation is set to four.
1. Perform steps 1-3 on page 4-37.
Computer displays Prod Comp (see Figure 283).
2. With prod comp displayed press the
button (see Figure 284).
Computer displays select product (see Figure
285).
3. Use the 3and 4 to scroll through the product list (see
Figure 286).
The computer displays the product selected (see Figure
287).
4. With a product selected (see Figure 287), press the
(1 yes) button to select a product (see Figure 288).
The computer displays modify alternating with yes
no (see Figure 289).
(1 yes) button to continue or the
5. Press the
button to return to PRODUCT SELECTION (see
Figure 290).
Computer displays LOAD COMP on left side with 4 or
some numeral on the right (see Figure 291). This is the
sensitivity setting recommended for this product. It is
highly recommended not to adjust this setting,
as it could have an adverse affect on the
product.
6. If changing this setting, enter a number between 0-9.
7. Press the u(INFO) button to accept selection (see
Figure 292).
(2) button (see Figure 293) three times to
8. Press the
exit.
The computer displays OFF (see Figure 294).
(1 yes)
Figure 283
Figure 287
(2)
Figure 289
Figure 293
4-38
Use caution when
Figure 284
Figure 285
Figure 286
Figure 288
Figure 290
Figure 291
Figure 292
Figure 294