Frymaster Enodis BIELA14 LOV Series Operator's Manual page 58

9. Press the (2) button again (see Figure 328) to exit.
The computer displays OFF (see Figure 329).
Note: The AIF filtration mode uses two measures before prompting to filter. One checks for cook
cycles and the other checks for time.
4.13.5 FILTER AFTER
The FLTR AFTR option is used to set the amount of cooking cycles which passes before the
filtration prompt is displayed.
1. Perform steps 1-3 on page 4-37
Scroll to FLTR AFTR (see Figure 330).
2. With FLTR aftr displayed, press the
button (see Figure 331).
The computer displays fltr aftr on the left and 0
on the right (see Figure 332).
3. Use the number keys (see Figure 333) from 0 to 9 to
enter the number of cook cycles before prompting to
filter (ex. after every 12 cycles enter as 12).
The computer displays fltr AFTR on the left and
12 on the right (see Figure 334).
4. With the desired selection displayed, press the
INFOu button (see Figure 335).
(2) button (see Figure 336) to exit.
5. Press the
The computer displays OFF (see Figure 337).
4.13.6 FILTER TIME
The FLTR time option is used to set the amount of time which passes before the filtration prompt
is displayed. This option is useful in lower volume stores, where filtration is desired more often than
the amount the cook cycles would generate.
1. Perform steps 1-3 on page 4-37.
Scroll to FLTR TIME (see Figure 338).
2. With FLTR TIME displayed, press the
button (see Figure 339).
Figure 328
(1 yes)
Figure 330
Figure 336
(1 yes)
Figure 338
4-42
Figure 329
Figure 331
Figure 332
Figure 333
Figure 334
Figure 335
Figure 337
Figure 339