Frymaster Enodis BIELA14 LOV Series Operator's Manual page 39

The computer displays cln vat Complete (see
Figure 147).
7. Clean the vat with a scrub brush and when complete
(1 yes) button to continue (see Figure
press the
148) or if waste tank is full, the message clears and
the computer displays OFF.
The computer displays
switch (see Figure 149).
8. Switch the bulk oil system switch to dispose.
If the bulk oil system waste tank is full, the computer
displays RTI TANK FULL (see Figure 150). Call the
bulk oil waste provider.
9. Press the (1) button to start disposal (see Figure
151).
The computer displays PAN TO WASTE (see Figure
152). The pump will operate for 60 seconds transferring
the waste oil from the pan to the bulk oil waste tanks.
The computer displays PAN empty at the end of 60
seconds (see Figure 153).
(2) button (see Figure 154) to run the pump
10. Press
an additional 60 seconds if the pan has oil remaining,
otherwise continue to the next step.
11. Once the pan is empty, press the
Figure 155) to continue to Section 4.10.4.4.
The vat is ready to be refilled with oil.
The computer displays Disengage dispose
switch (see Figure 156).
12. Switch off the bulk oil system.
13. Press the (1) button to disengage disposal switch
(see Figure 157).
engage dispose
(1) button (see
4-23
Figure 147
Figure 148
Figure 149
Figure 150
Figure 151
Figure 152
Figure 153
Figure 154
Figure 155
Figure 156
Figure 157