Frymaster Enodis BIELA14 LOV Series Operator's Manual page 38

4.10.4.3 Draining and Disposing Oil using Bulk Oil Systems
Bulk oil systems use pumps to move the oil from the fryer to holding tanks for fresh and exhausted
oil. Additional plumbing is used to connect the bulk oil systems to the fryers.
1. With the computer OFF (see Figure 136), press and
hold the FLTR button of the corresponding vat for
three seconds (see Figure 137).
Computer displays fltr menu for three seconds
changing to Auto Filter (see Figure 138).
2. Press the u (INFO) button (see Figure 139) and scroll
to dispose (see Figure 140).
3. With dispose displayed, press the
button to continue (see Figure 141).
The computer display alternates between Dispose and
Yes NO (see Figure 142).
If CHK PAN is displayed, remove and replace the filter
pan, ensuring that the pan is seated firmly into the fryer.
4. To dispose press the
(see Figure 143).
The heating source is disabled. The drain valve opens and
the computer displays disposing (see Figure 144).
5. If disposing of boil-out solution, remove the filter pan and place a METAL container with a
capacity of FOUR gallons (15 liters) or larger under the fryer to drain the solution.
The drain valve remains open and the computer displays
Vat empty (see Figure 145) alternating with yes
no.
6. When the vat is empty, press the
continue (see Figure 146).
(1 yes)
(1 yes) button to continue
(1 yes) button to
4-22
Figure 136
Figure 138
Figure 139 Figure 140
Figure 141 Figure 142
Figure 143
Figure 144
Figure 145
Figure 137
Figure 146