Frymaster Enodis BIELA14 LOV Series Operator's Manual page 53

The computer displays OFF (see Figure 276).
10. Follow the procedures on page 4-19 to dispose of the
oil.
4.13 Programming Level Two
To enter Level two programming mode:
1. With the computer OFF press the TEMP and INFO
buttons (see Figure 277) simultaneously for 10
seconds until LEVEL 2 is displayed; a third chirp
sounds (see Figure 278).
The computer displays ENTER Code and sounds an
alert (see Figure 279).
2. Enter 1234 (see Figure 280).
The computer displays level 2 program for
three seconds and sounds an alert (see Figure 281).
3. Press the t and u buttons to scroll between:
a. Prod comp
b. e-log
c. password
d. alert tone
e. fltr AFTr
f. fltr time
NOTE:
Use the 3and 4buttons to move between positions within the selections.
When entering numbers, press the corresponding button using the 0-9 keys.
Press the t and ubuttons to accept input and move to the next or previous menu item.
4. With the desired selection displayed press the
yes) button (see Figure 282).
1
See pg. 4-38
See pg. 4-39
See pg. 4-39
See pg. 4-41
See pg. 4-42
See pg. 4-43
(1
4-37
Figure 276
Figure 277
Figure 278
Figure 279
2
3 4
(1234)
Figure 280
Figure 281
Figure 282