INSPECTION
[Brake fluid level switch]
Use ohmmeter to check switch for resistance
and continuity.
If found defective, replace switch.
Fig. 21-23
21-14
W/R : White/Red
:
Black
21-8. OIL PRESSURE LAMP
The oil pressure lamp circuit
pressure switch installed to the cylinder block
and the lamp (warning lamp) inside the combi-
nation meter.
The oil pressure switch so operates that it is
switched OFF when oil pressure is produced by
the started engine and then fed to switch.
1. Battery
2. Main switch
3. Fuse
4. Oil pressure lamp
Fig. 21-24
INSPECTION
[Oil pressure switch]
Use a ohmmeter to
check the switch continuity.
During engine
Running
At Engine Stop
Fig. 21-25
consists
of the oil
W/Y : White/Yellow
No continuity
obtained (- 52 1
Continuity obtained
1. To wiring harness
2. Cylinder block