Maintenance Services; Clutch Pedal Height; Clutch Release Arm; Clutch Release Shaft Fork - Suzuki Samurai 1986 Service Manual

Clutch Release Shaft Fork

Apply grease to end of fork.
Fig. I l- 16 @ Grease (SUZUKI SUPER
GREASE "'A ")

Clutch Release Arm

Align two punch marks when installing clutch
release arm on clutch release shaft.
Fig. 11-17
Clutch Release Shaft Bushes
For reinstallation of bushes, refer to p. 13-5 in
SECTION 13 TRANSMISSION of this manual.
Transmission
For remounting transmission, refer to p. 13-4 in
SECTION 13 TRANSMISSION of this manual
and reverse dismounting procedure.
Before remounting transmission ass'y, apply
grease (SUZUKI SUPER GREASE I) to input
shaft. Refer to Fig. 13-84.
11-8

11-5. MAINTENANCE SERVICES

Clutch Pedal Height

Adjust height of clutch pedal with clutch pedal
stop bolt so that pedal is level with brake pedal.
Tighten lock nut after adjusting.
.
4
Fig. 1
Clutch Pedal Free Travel
1) Depress clutch pedal, stop the moment
clutch resistance is felt, and measure distance
(clutch pedal free travel). Free travel should
be within the following specification.
Clutch pedal free travel
Fig. 1
2. Lock nut
3. Adjust bolt
4. Clutch pedal
2 0 - 3 0 m m
(0.8
1. Clutch pedal
free travel