Water Pump; Oil Filter; Exhaust Manifold And Cover - Suzuki Samurai 1986 Service Manual

Fig. 3-6-39
4) Connect water hoses to water inlet pipe and
clamp each hose.

Oil Filter

Install oil filter.
CAUTION:
For oil filter installation, refer to P. 1-7 of
this manual.

Exhaust Manifold and Cover

1) Install exhaust manifold gasket to cylinder
head.
Use new gasket.
NOTE:
Clean cylinder head mating surface with gasket
before installation.
2) Install exhaust manifold to cylinder head.
3) Tighten bolts and nuts to specified torque.
Tightening torque N.m
for bolts and nuts
18 - 28
4) Install exhaust manifold cover.
lb-ft
kg-m
1.8 - 2.8 13.5-20.0

Water pump

1) Install water pump gasket to cylinder block.
Use new gasket.
NOTE:
Clean cylinder block mating surface with gasket
before installation.
2) Install water pump to cylinder block.
3) Tighten bolts and nuts to specified torque.
Tightening torque N.m
for water pump
bolts and nuts
Fig. 3-6-40
4) Install rubber seats 0; one between oil
pump and water pump and the other be-
tween water pump and cylinder head.
Fig. 3-6-4 1
I b-ft
0.9 -
1.2 7.0 - 8.5
,
3-47