Suzuki Samurai 1986 Service Manual page 273

2) Using the same special tool (C), mentioned
above, drive out yoke pin on high speed
gear shift fork, and pull out shift shaft.
As in above case, be careful not to let
locating ball, interlock ball and spring fly
away.
When removing yoke pin, be sure not to
drive it out so far as to contact case. Or it
will cause damage to case.
Fig. 13-25
Fig. 13-26
3) Drive yoke pin out of low speed gear shift
fork as in above step 2) and pull out fork
shaft and fork.
Fig. 13-27
Fig. 13-28
13-11