Input Shaft End Bearing; Clutch Cover And Disc; Clutch Release Shaft Bushes; Clutch Release Bearing - Suzuki Samurai 1986 Service Manual

11-2. REMOVAL

Removal of clutch presupposes that the trans-
mission has been dismounted according to the
method outlined in SECTION 13 TRANS-
MISSION.

Clutch Cover and Disc

Remove 6 bolts securing clutch cover to fly-
wheel, and take off clutch cover and disc.
Fig. 1 l-3

Clutch Release Bearing

Remove clutch release bearing from transmission
input shaft bearing retainer.
Fig. 11-4
11-4

Input Shaft End Bearing

Use bearing remover (special tool) for removal
of this bearing.
1. Special tool (Bearing remover 09917-58010)
2. Input shaft bearing
Fig. 11-5

Clutch Release Shaft Bushes

For replacement of bushes, refer to p. 13-5
of SECTION 13 TRANSMISSION.